1/32 I.A.R.80/81 Late-Type Seat Harness

This product was added to our catalog on Tuesday 03 June, 2014.


Units in Stock0
Add to Cart:

1/32 I.A.R.80/81 Late-Type Seat Harness. This is the harness used on all I.A.R.80 and I.A.R.81 aircraft after June 1943.  
Suitable for the new Azur FRROM I.A.R.81-C kit

No painting needed. Simply remove the pre-cut straps from the backing paper, glue the detail parts, thread them though the buckles and fit them to your model.
The set includes one sheet of photo etched stainless steel parts, one set of pre-cut paper representing the straps and a complete set of detailed instructions.

The buckles can be adjusted to the desired length in the same manner as the real thing.

The "paper" used on these seatbelts has a high rag content and no lignin (meaning that it is actually a "textile" material), it is acid free and died in the grain. 
Why is this better than "fabric"? Fabric was considered and tested, then it was abandoned for the following reasons:
- Fabric is hard to cut properly. The edges will often fray. The paper used on these seatbelts will always keep a well-defined edge.
- The paper used on these seatbelts is extremely easy to "set" and stay on the model if you moisten it slightly. Fabric tends to be "springy" and will not settle like real seatbelts.
- Real seatbelts have a very "tight" and "solid" look about them. Seatbelt strap weaves are usually quite fine and the threads tend to be around 1mm on the coarsest materials, but usually they are much finer. In scale 1/32 such coarse thread would be 0.03mm, which is basically one fifth of the thickness of a human hair. There is no way such weave or thread could ever be visible on accurately-scaled straps. The paper used on these seatbelts provides the correct "tight" and "solid" look of the real thing.
- "Fabrics" tends to have a "plain weave" respectively a perpendicular "over and under" pattern. No seatbelt material is ever woven like that - most of them tend to be a "twill pattern". Furthermore, no matter how tightly the fabric is woven, on the fabric material used for "fabric" seatbelts there are fine gaps between the threads and as a result the seatbelt will be slightly translucent. The paper used on these seatbelts provides the correct thickness and opacity of the real thing.

Review on LargeScalePlanes: http://www.largescaleplanes.com/reviews/review.php?rid=1397
Review on Scale Plastic & Rail:  http://www.scaleplasticandrail.com/kaboom/index.php/all-things-aviation/132-135-scale/132-aftermarket-items/2200-1-32-1-24-multimedia-seatbelts-rb-productions

  • Model: RB-P32038
  • Shipping Weight: 0.005kgs
  • Manufactured by: RB Productions

Your IP Address is:
RB Productions,
7 The Mall, Main Street
Leixlip, Co. Kildare,
W23 X725
VAT No. IE3328692QH
Copyright © 2008-2018 RB Productions | Comstock Template Design by Clyde Jones | Powered by Zen Cart